
Manchester’s delivery food market has made dark kitchens a significant part of the city’s hospitality landscape. There are now hundreds of businesses operating from dark kitchens in Manchester, illustrating the scale of delivery-focused cooking.
Multiple operators, intensive cooking and shared infrastructure create risks that extend beyond any single unit. One kitchen fire could damage shared extraction, interrupt utilities and shut down an entire hub.
For operators and landlords, fire safety needs to cover both individual kitchens and the facility as a whole.
Start with a specialist fire risk assessment
A dark kitchen fire risk assessment (FRA) should reflect the actual cooking processes, equipment, staffing and layout. Appoint an assessor competent to evaluate commercial cooking and complex shared premises.
Consider deep-fat frying, open flames, solid fuels, grease accumulation, packaging storage and peak-time activity. Assess shared escape routes, fire separation and how smoke or fire could reach neighbouring units.
Review the assessment when operators, appliances, menus or layouts change. A new cooking process can introduce risks that the original assessment did not address.
Establish where fire suppression is required
Automatic kitchen fire suppression is not a blanket legal requirement for every dark kitchen in England. However, it may be necessary to control the identified risks or be specified by the building’s fire strategy, approval conditions, lease or insurer.
A suitable system should protect the relevant cooking equipment and extraction areas, with appropriate fuel or power shutdown arrangements. Specialist design matters: moving a fryer or adding a grill can change whether the protection remains adequate.
Confirm the requirements before trading, arrange servicing and train staff in emergency procedures. Portable firefighting equipment must also suit the hazards.
Check gas interlocks and ventilation
Where mechanical extraction serves as the flue for relevant gas appliances, HSE guidance identifies the need for an appropriate airflow-to-gas interlock. This shuts off the gas if extraction fails.
Other existing arrangements require competent assessment; operators should not assume an older installation is safe simply because it has remained in use.
Use a Gas Safe registered engineer qualified for the relevant commercial catering work. Never bypass an interlock to keep cooking during a ventilation fault.
Protect and maintain kitchen ductwork
Grease-laden extraction can carry fire beyond the kitchen where it starts. Check the complete duct route, including concealed areas, cleaning access and penetrations through fire-separating walls or floors.
Where required by the design, provide suitable fire-resisting ductwork or enclosure and compatible fire stopping. Specialist kitchen extract design is essential.
Set cleaning frequencies around cooking intensity and grease accumulation. Keep inspection and cleaning records; a clean canopy does not demonstrate that the full duct system is clean.
Coordinate across the entire hub
Responsible Persons sharing premises must cooperate and coordinate fire safety arrangements.
Agree who maintains shared alarms, extraction, fire doors and escape routes. Establish a coordinated evacuation plan and a process for reporting defects and approving equipment changes.
Clear responsibilities help prevent one operator’s maintenance failure becoming every tenant’s business interruption.
Manchester based expertise with nationwide services
Total Fire Group provides Manchester based fire safety expertise and nationwide services to help commercial clients assess risks and plan improvements.
Contact our team to discuss fire risk assessments and fire safety support for your dark kitchen operation.