FD30 vs. FD60 Fire Doors: Which Specification Does Your Premises Need?

Blog

Choosing a fire door involves more than deciding between 30 and 60 minutes. The correct specification depends on the door’s location, the building’s use and the fire safety design.

For building managers, assuming every office corridor needs FD30 or every stairwell needs FD60 can lead to unsuitable replacements and unnecessary expenditure.

Total Fire Group provides Manchester based fire safety expertise and nationwide services to help property managers assess existing doors and plan remedial action.

What do FD30 and FD60 mean?

FD30 and FD60 describe fire resistance performance of 30 and 60 minutes respectively under the relevant test conditions. They are not guarantees of a fixed period of protection in every real fire.

The rating relates to the complete installed assembly: the leaf, frame, glazing, seals and compatible hardware. A rated leaf installed with unsuitable components does not establish the performance of the finished door.

Smoke control is a separate consideration. Designations such as FD30S and FD60S indicate additional smoke-control performance. Check the full specification and supporting evidence, rather than relying on the minute rating alone.

When might FD30 be suitable?

Thirty-minute fire doors are commonly used in office escape-route arrangements, including certain protected corridors and lobbies, where the applicable design requires that level of protection.

However, an ordinary office corridor does not automatically require fire doors, and a corridor door is not automatically FD30. Its function may be to separate compartments, protect an escape route or restrict smoke spread.

Check the fire strategy, door schedule and relevant guidance before selecting a replacement.

When might FD60 be required?

Sixty-minute doors may be specified at certain compartment boundaries, protected shafts or higher-risk rooms where the fire safety design requires greater resistance.

Boiler rooms and plant rooms need particular attention because equipment, fuel and the surrounding construction can affect the required protection. The room’s name alone does not determine its door rating.

The same applies to protected stairwells. Some arrangements use 30-minute doors; others require 60 minutes or a different specification. Lobby protection and the building’s overall design matter.

In high-rise buildings, check each door’s role within the compartmentation and evacuation strategy. Height alone does not mean every fire door must be FD60. The applicable building regulations guidance and project fire strategy should inform the choice. 

How should building managers confirm the specification?

Before ordering, establish:

  • The door’s purpose: escape-route protection, compartment separation or protection of a particular hazard.

  • The design requirement: consult the fire strategy, drawings, door schedule and applicable building regulations guidance.

  • The supporting evidence: confirm the proposed assembly’s fire resistance, smoke control and permitted configuration.

  • The installation requirements: check compatible frames, hardware, seals, fixings and surrounding construction.

Where records are missing or conflicting, obtain competent advice. A visual inspection can identify defects, but cannot establish an unknown fire resistance rating by appearance alone.

Avoid replacing the leaf without checking the assembly

Fitting an FD60 leaf into an existing FD30 arrangement does not automatically upgrade it to 60 minutes. The frame, glazing, hardware and installation must support the intended performance. 

Keep specification and installation records, and include the door in the building’s inspection and maintenance programme.

Manchester based support with nationwide services

Total Fire Group helps commercial and residential property managers identify fire door defects and understand the next steps.

Contact our Manchester based team to discuss fire door inspections and nationwide services for your premises.